compressor and motor mounted on frame with shock absorbers. Frame, manufactured in light weight construction, is designed for easy change of power sources.
micronic type intake filter
Lubrication by oil pump
Intercooler after each stage
aftercooler
final mechanical separator for the removal of oil-/ water condensate
optical oil level control on compressor block
final safety valve 225 bar, 330 bar, 350 bar or 420bar
back pressure/ non return valve
thermal circuit breaker
Automatic star-delta switch
3 m connection cable with EEC connector
hour meter
PURIFICATION SYSTEM F 2400
COMP TRADE long-life transparent filter cartridge with saturatiuon indicator processing in 3 stages (drying, neutralisation, micro filtering)
air quality DIN 3188 / EN 12021 : 2014
filling : MS-AC-MS supplying air quality according to DIN 3188 / EN 12021 : 2014
Regenerable air volume 1200 m³ by 20° ambient temperature.
FILLING RAMP WITH 4 × 300 OR 4 × 200 BAR DIRECT CONNECTION
4 level filling valves with integrated vent G5/8" acc DIN 477
pressure gauge for filling pressure
AUTO-STOP
ON/Off switch, main switch and auto stop when reaching final filling pressure
pressure switch with cut-off when the final pressure is reached
AUTOMATIC DRAINAGE SYSTEM
drains all separators between the individual stages and also the final separator during compressor Operation
unloaded start integrated (automatically draining at every shut-down of the unit)
condensate collecting tank, content approx. 5 litres
sound absorber
timer for autodrain system to adjust the most economical drain-intervals
COMPTROL 1
for oil level control with auto stop and reset button when reaching minimum oil level in the compressor block / oil level indicator. The oil level indicator is situated on front of the compressor-frame for additional easy optical control.
CABINET TEMPERATURE
Cooling Temperature Control
Switching off the compressor when the maximum permissible temperature is exceeded