| 型号 | 单位 | XE335C | |
| 操作重量 Operating weight | kg | 33800 | |
| 铲斗容量 Standard bucket capacity | m³ | 1.4～1.6 | |
| 发动机 | 发动机型号 Engine Model | / | ISUZU AA-6HK1XQP |
| 直喷 Direct injection | / | √ | |
| 4冲程 Four strokes | / | √ | |
| 水冷 Water cooling | / | √ | |
| 涡轮增压 Turbo charged | / | √ | |
| 空空中冷 Air to air intercooler | / | √ | |
| 缸数 No. of cylinders | / | 6 | |
| 发动机输出功率 Rated power/speed | kw/rpm | 184/2000 | |
| 最大扭矩/转速 Max. torque/speed | N.m | 872.8/2000 | |
| 排量 Displacement | L | 7.79 | |
| 主要性能 | 行走速度 Travel speed | km/h | 5.5/3.3 |
| 回转速度 Swing speed | r/min | 9.7 | |
| 爬坡能力 Max. gradeability | / | ≥35 | |
| 接地比压 Ground pressure | kPa | 66 | |
| 铲斗挖掘力 Max.Bucket digging force | kN | 225 | |
| 斗杆挖掘力 Max.arm crowd force | kN | 183 | |
| 最大牵引力 Max.traction force | kN | 261 | |
| 液压系统 | 主泵 Main pump | / | 2个柱塞泵 |
| 主泵额定流量 Rate flow of main pump | L/min | 2×280 | |
| 主安全阀压力 Max pressure of prime relief valve | MPa | 31.5/34.3 | |
| 行走系统压力 Max pressure of travel system | MPa | 34.3 | |
| 回转系统压力 Max pressure of swing system | MPa | 27.5 | |
| 先导系统压力 Max pressure of pilot system | MPa | 3.9 | |
| 油类容量 | 燃油箱容积 Fuel tank capacity | L | 630 |
| 液压油箱容积 Hydraulic tank capacity | L | 320 | |
| 发动机油容量 Engine lubrication | L | 28 | |
| 外形尺寸 | A总长 Overall length | mm | 11246 |
| B总宽 Overall width | mm | 3190 | |
| C总高 Overall height | mm | 3330 | |
| D转台宽度 Overall width of upperstructure | mm | 2960 | |
| E履带长度 Track length | mm | 4725 | |
| F底盘总宽 Overall width of undercarriage | mm | 3190 | |
| G履带宽度 Crawer width | ㎜ | 600 | |
| H履带轴距 Track length on ground | mm | 3183 | |
| I轨距 Crawer gauge | mm | 2590 | |
| J配重离地间隙 Clearance under counter weight | mm | 1170 | |
| K最低离地间隙 Ground clearance | mm | 495 | |
| L尾部最小回转半径 Min.tail swing radius | mm | 3450 | |
| 工作范围 | A最大挖掘高度 Max. digging height | mm | 10404 |
| B最大卸载高度 Max. dumping height | mm | 7256 | |
| C最大挖掘深度 Max. digging depth | mm | 7158 | |
| D8英尺水平面挖掘深度8inch horizonal digging depth | mm | 6935 | |
| E最大垂直挖掘深度 Max. vertical wall digging depth | mm | 6526 | |
| F最大挖掘半径 Max. digging reach | mm | 10887 | |
| G最小回转半径 Min. swing radius | mm | 4424 | |
| 动臂偏转角度 Angle of arm deflection | Degree | ||